Star Micronics Line Thermal Printer - Manual (Page 100)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-84
3.7. 2 Color Printing Command Details
The following commands control 2 color printing functions.
The following commands are effective only when using a model handling 2 color printing.
ESC RS c n
[Name] Set print color in 2 color print mode
[Code]
ASCII ESC RS c n
Hex. 1B 1E 63 n
Decimal 27 30 99 n
[Defined Area]
0≤n≤1
48≤n≤49 (”0”≤n≤”1”)
[Initial Value]
n = 0, 48 (When in 2 color print mode)
[Function] Specifies print color in 2 color print mode.
This command is ignored when not in the 2 color print mode.
Specifies black for the print color when in 2 color print mode.
This command is cleared only when the printer is reset.
The specification of this command is not cleared by ESC @ CAN.
However, print color is initialized to black by the ESC @ and CAN only when in the compatible 2
color print mode.
n Specifies 2 color print mode color
0, 48 Black
1, 49 Red