Star Micronics Line Thermal Printer - Manual (Page 66)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-50
3.3.13. Print Settings
ESC RS d n
[Name] Set print density
[Code]
ASCII ESC RS d n
Hex. 1B 1E 64 n
Decimal 27 30 100 n
[Defined Area]
0≤n≤15
48≤n≤57 (”0”≤n≤”9”)
65≤n≤70 (”A”≤n≤”F”)
[Initial Value]
Memory switch setting
[Function] Sets print density.
This command stops printing to be executed.
n Print density
0, 48 Print density 1.3
1, 49 Print density 1.2
2, 50 Print density 1.1
3, 51 Print density 1.0
4, 52 Print density 0.9
5, 53 Print density 0.8
6, 54 Print density 0.7
7, 55 (Reserved)
8, 56 (Reserved)
9, 57 (Reserved)
10, 65 (Reserved)
11, 66 (Reserved)
12, 67 (Reserved)
13, 68 (Reserved)
14, 69 (Reserved)
15, 70 (Reserved)