Star Micronics Line Thermal Printer - Manual (Page 83)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-67
ESC * r B
[Name] Quit raster mode
[Code]
ASCII ESC * r B
Hex. 1B 2A 72 42
Decimal 27 42 114 66
[Defined Area]
- - -
[Initial Value] - - -
[Function] Quits raster mode.
When quitting the raster mode, if there is raster data remaining in the image buffer of the raster
mode, it quits the raster mode after executing the raster EOT mode.
Note that with this command, IEEE 1284 reverse mode is allowed in parallel I/F and it sets the top
of page with the line mode.
ESC * r C
[Name] Clear raster data
[Code]
ASCII ESC * r C
Hex. 1B 2A 72 43
Decimal 27 42 114 67
[Defined Area]
- - -
[Initial Value] - - -
[Function] Clears image buffer data in the raster mode.