Star Micronics Line Thermal Printer - Manual (Page 26)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-10
ESC g
[Name] Specify 14 dot pitch
[Code]
ASCII ESC g
Hex. 1B 67
Decimal 27 103
[Defined Area]
- - -
[Initial Value] Memory switch setting
[Function] Specifies rights space for the ANK 12 x 24 dot fonts to 2 dots.
Specification A
This command is enabled only when the memory switch setting is set for DBCS (2 byte countries).
It is ignored when the memory switch setting is set for SBCS (1 byte countries).
Specification B
This command is enabled for both when the memory switch setting is set for either DBCS (2 byte
countries) or SBCS (1 byte countries).