Star Micronics Line Thermal Printer - Manual (Page 78)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-62
ESC ? LF NUL
[Name] Reset printer (execute self print)
[Code]
ASCII ESC ? LF NUL
Hex. 1B 3F 0A 00
Decimal 27 63 10 0
[Defined Area]
- - -
[Initial Value] - - -
[Function] Hardware resets the printer and executes on self print.
After sending this command, the next data is not sent until the printer is online (in a state wherein it
can receive data).
When resetting the printer, the following processes are performed.
I/F Mode Process
Parallel - - - BUSY output
RS-232C DTR mode DTR mark output
Xon/Xoff mode Xoff output