Star Micronics Line Thermal Printer - Manual (Page 156)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 5-15
2. Separator character 1 (1 Byte)
Sends “:”
3. Data Type (1byte)
Indicate printer status data; sends “B” (binary type).
4. Status Length (2 bytes)
2 byte value indicating printer status byte count.
5. Printer Status (Variable length)
Status sent by printer.
Status differs according to the cause.
See the command causes and automatic status for details on the content of statuses.
6. Separator character 2 (1 Byte)
Sends “;”
3) Status Transmission Specification List
Status Cause STAR ASB Length Status Data
Status Type Separated Data Status Printer Separated
First/Second
Bytes
Cause
Third/Fourth
Bytes
n Parameter
Character
1
Type Length Status Character
2
ASB
Automatic Status ASB 0x0000 -- -- -- -- -- -- --
ESC ACK SOH
Printer Status
Request ASB 0x0000 -- -- -- -- -- -- --
ENQ
Printer Status
Request ASB 0x0008 “01” Omitted “:” “B” 0x0001 Status “;”
EOT
Printer Status
Request ASB 0x0008 “02” Omitted “:” “B” 0x0001 Status “;”
ESC SYN 3 n
Presenter Counter
Request ASB 0x0011 “13” “00” ≤ n ≤ “01”
“30” ≤ n ≤ ”31” “:” “B” 0x0008 Status “;”
ESC GS x I
PDF417
Information
Request ASB 0x000C “16” Omitted “:” “B” 0x0005 Status “;”
ESC GS y I QR
Code Information
Request ASB 0x000D “19” Omitted “:” “B” 0x0006 Status “;”