Esc rs d n – Star Micronics Line Thermal Printer User Manual
Page 104
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
3-88
ESC RS d n
[Name] Set print density
[Code]
ASCII ESC
RS
d n
Hex.
1B
1E
64 n
Decimal 27
30
100 n
[Defined Area]
0≤n≤15
48≤n≤57 (”0”≤n≤”9”)
65≤n≤70 (”0”≤n≤”F”)
[Initial Value]
Memory switch setting
[Function]
Sets print density.
This command stops printing to be executed.
When in two-color print mode, this can set the print density of red print.
n Print
Density
Single Color Printing Mode
Two Color Printing Mode Red Print Density
0, 48
Print density 1.3
Print density 1.2
1, 49
Print density 1.2
Print density 1.2
2, 50
Print density 1.1
Print density 1.0
3, 51
Print density 1.0
Print density 1.0
4, 52
Print density 0.9
Print density 1.0
5, 53
Print density 0.8
Print density 0.8
6, 54
Print density 0.7
Print density 0.8
7, 55
(Reserved)
(Reserved)
8, 56
(Reserved)
(Reserved)
9, 57
(Reserved)
(Reserved)
10, 65
(Reserved)
(Reserved)
11, 66
(Reserved)
(Reserved)
12, 67
(Reserved)
(Reserved)
13, 68
(Reserved)
(Reserved)
14, 69
(Reserved)
(Reserved)
15, 70
(Reserved)
(Reserved)