Star Micronics Line Thermal Printer - Manual (Page 117)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-101
3.10. AUTO LOGO Function Command Details
This command functions to print logos, like the one below, by only changing the product name, when only product
names can be changed in systems that are already in use. Also, this function has two operating modes.
1) Standard Auto Logo Function
The Auto Logo function is preset and executes the following operations using the print cut command under the current
system as a trigger.
1. Starts up the Auto Logo function using the current system cut command as a trigger
2. Prints if there is print data in the image buffer
3. Executes user macro 1
4. Prints the Auto Logo
5. Executes user macro 2
Logo 2 is printed by #4 Auto Logo printing according to the command character “/” that was preset in the current print
data and embedding the logo number “2” to print. Specifically, if the product is registered with “CHEESE BURGER/2”
the logo 2 coupon ticket is automatically printed for the purchaser of a cheese burger. Also, Logo 1 for the header is
used for company logos. By registering to the user macro 2 of #5, cut command + Logo 1 print command, the company
logo of logo1 will be printed. User macro 1 of #3 is used when it is necessary to position the Auto Logo in the center.
When doing so, register the left alignment command using the user macro 2 of #5 and return to its original setting.
***************
M AC DO NALDS
***************
1. CHEESBUGER $2. 00
2. CO KE $1. 00
----------------------
TO TAL $3. 00
********************
MACDONALDS
********************
1.CHEESEBURGER $2.00
2.COKE $1.00
--------------------------------------
TOTAL $3.00
********************
MACDONALDS
********************
1.CHEESEBURGER $2.00
2.COKE $1.00
--------------------------------------
TOTAL $3.00
Header
Header
COKE
Cheeseburger
Logo 1
Logo 2
Logo 3
Current System Print Data
Current
System
Print Data
Partial Cut
Partial Cut
Header
********************
MACDONALDS
1. Starts Auto Logo with trigger
of cutting command.
2. Executes user macro 1.
4. Executes user macro 2.
- Executes cut.
- Executes Header logo
printing.
3. Prints Auto Logo.