Star Micronics Line Thermal Printer - Manual (Page 109)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-93
3.8. Presenter Related Command Details
The following commands control the presenter functions.
The following commands are effective only on models equipped with a presenter.
ESC SYN 0 n
[Name] Execute presenter paper recovery
[Code]
ASCII ESC SYN 0 n
Hex. 1B 16 30 n
Decimal 27 22 48 n
[Defined Area]
n = 0
[Initial Value] - - -
[Function] Executes presenter paper recovery.
This command is ignored when a presenter is not connected.
Also, this command is executed when paper is supplied by the presenter, exists in the presenter
and the paper has been cut. This command is ignored with under all other conditions. (Ignored
when paper is being recovered.)
ESC SYN 1 n
[Name] Set presenter paper automatic recovery function and automatic recovery time
[Code]
ASCII ESC SYN 1 n
Hex. 1B 16 31 n
Decimal 27 22 49 n
[Defined Area]
0≤n≤255
[Initial Value] Memory switch setting
[Function] Sets presenter paper automatic recovery function and automatic recovery time.
This command is ignored when a presenter is not connected.
Settings using this command are effective from the next sheet when the printer processes this
command and paper has already been supplied to the presenter.
N Functions
n = 0 Paper automatic recovery function invalid.
1≤n≤255 Paper automatic recovery function valid.
Automatic recovery time: n x 0.5 sec (0.5 sec to 127.5 sec)