Star Micronics Line Thermal Printer - Manual (Page 45)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-29
ESC GS A n1 n2
[Name] Move absolute position
[Code] ASCII ESC GS A n1 n2
Hex. 1B 1D 41 n1 n2
Decimal 27 29 65 n1 n2
[Defined Area]
0≤n1≤255
0≤n2≤255
[Initial Value] - - -
[Function] Moves the printing position from the left margin to the (n1 + n2 x 256) position.
This command is ignored if the print region is exceeded.
ESC GS R n1 n2
[Name] Move relative position
[Code]
ASCII ESC GS R n1 n2
Hex. 1B 1D 52 n1 n2
Decimal 27 29 82 n1 n2
[Defined Area]
0≤n1≤255
0≤n2≤255
[Initial Value] - - -
[Function] Moves the printing position from the current position to the (n1 + n2 x 256) position.
This command is ignored if the print region is exceeded.
When (n1 + n2 x 256) ≥ 32768, it moves {65536 – (n1 + n2 x 256)} dots in the left direction.
When (n1 + n2 x 256) < 32768, it moves (n1 + n2 x 256)} dots in the right direction.