Star Micronics Line Thermal Printer - Manual (Page 119)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-103
1) Set the Auto Logo function in advance and register it to the non-volatile memory.
ESC GS / 1 n (n=0x01) Auto Logo Function ON
ESC GS / 2 n ( n=“/” ) Specify Auto Logo Command Character (“/”)
ESC GS / 3 nL nH d1 d2... dk User Macro 1 Definition
nL=4 nH=0 Registered Macro Count = 4 Bytes
d1=0x1b d2=0x1d d2=0x61 d3=0x01 Registered Macro
GS a 1: Center Alignment>
ESC GS / 4 nL nH d1 d2... dk User Macro 2 Definition
nL=12 nH=0 Registered Macro Count = 12 Bytes
d1=0x1b d2=0x64 d3=0x03 Registered Macro
d 3: Cutting position partial cut>
d4=0x1b d5=0x1c d6=0x70 d7=0x01 d8=0x00
d9=0x1b d10=0x1d d11=0x61 d12=0x00
ESC GS / 5 n (n=0x01) Auto Logo Command Character, Space Switch
ESC GS / 6 n ( n=0x01) Partial Cut Before Auto Logo Printing Valid
ESC GS / W Register Auto Logo Definition Data to Non-volatile Memory
2) Send registered command character embedded in print data
“CHEESE BURGER /2” →
“/” is recognized as a command character.
Command characters are replaced by spaces.
“2” specifies Logo 2.