B n1 n2 data – Star Micronics Line Thermal Printer User Manual
Page 90
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications
3-74
b n1 n2 data
[Name] Send raster data (auto line feed)
[Code] ASCII
b n1 n2 d1
d2
... dk
Hex.
62 n1 n2 d1
d2
... dk
Decimal
98 n1 n2 d1
d2
... dk
[Defined Area]
0≤n1≤255
0≤n2≤255
0≤d≤255
k= n1+n2 x 256
1≤k
[Initial Value]
- - -
[Function]
Sends raster data (auto line feed).
Raster data is sent in (n1 + n2 x 256) byte counts as binary data.
Raster data exceeding the print area currently set is discarded.
The image buffer expanded position is automatically line fed one dot row and moved to the left
margin on the next line after expanded the image buffer data 1 dot row using this command.
Also, data expansion is duplicated on the data in the current image buffer (OR process).
The following shows expanded image buffer for the set raster print color.
n is a decimal description (max. 255 digits) using ASCII characters.
Print color
Expanded image buffer
Black
Image buffer for black
Cyan
Image buffer for color
Magenta
Image buffer for color
Yellow
Image buffer for color