Star Micronics Line Thermal Printer User Manual

Page 76

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――

STAR Line Mode Command Specifications

3-60

ESC @

[Name] Command

initialization

[Code]

ASCII ESC

Hex.

Decimal 27

[Defined Area]

- - -

[Initial Value]

- - -

[Function]

Initializes each command after printing data in the line buffer.

However, printers with memory switch settings are initialized to the memory switch settings.

DIPSW re-reading is not performed.

• ANK characters, Chinese character adornment, expansion

• Chinese character mode

• ANK right space

• Chinese character left/right spaces

• Character pitch

• International characters

• Code page

• Set slash zero

• Set specify/cancel external character (external register character data is retained)

• Page length

• Current position (move to top of page, top of line)

• Horizontal tab/Vertical tab

• Line feed amount

• Set upside-down, position alignment

• Left/right margins

The following shows the specifications that are not initialized by this command.