Star Micronics Line Thermal Printer - Manual (Page 13)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 2-3
Class
Commands
Name
Chinese ESC p Set to JIS Chinese character mode
characters ESC q Cancel JIS Chinese character mode
ESC $ Set/cancel JIS Chinese character mode
ESC s Set two byte Chinese characters left/right spaces
ESC t Set 1 byte Chinese characters left/right spaces
ESC r Register Chinese download characters
Others CAN Cancel print data and initialize commands
ESC @ Command initialization
ESC GS # Set memory switch
ESC ? Reset printer
ESC GS r Get CRC code
Macro ESC GS
+ Register macro
(*) Chinese character commands
• Chinese character control commands are ignored on printers not installed with Chinese character fonts (those
intended for overseas).
• All Chinese character control commands are ignored if the specification for the location of use is specified as
SBCS (single byte countries) by the memory switch.
• R a s t e r r e l a t e d c o m m a n d s
Class
Commands
Name
Raster commands ESC * r R Initialize raster mode
ESC * r A Enter raster mode
ESC * r B Quit raster mode
ESC * r C Clear raster data
ESC * r D Drive drawer
ESC * r E Set EOT mode
ESC * r F Set FF mode
ESC * r P Set page length
ESC * r Q Set print quality
ESC * r m l Set left margin
ESC * r m r Set right margin
ESC * r T Set top margin
ESC * r K Set print color
b n1 n2 d1...dk Transfer raster data (auto line feed)
k n1 n2 d1...dk Transfer raster data
ESC * r Y Position movement in vertical direction (Line break at specified dot)
ESC FF NUL Execute form feed mode
ESC FF EOT Execute EOT mode
ESC * r N Discard data for specified byte count
ESC * r V Execute external buzzer drive