Star Micronics Line Thermal Printer - Manual (Page 105)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-89
ESC RS r n
[Name] Set printing speed
[Code]
ASCII ESC RS r n
Hex. 1B 1E 72 n
Decimal 27 30 114 n
[Defined Area]
0≤n≤3
48≤n≤51 (”0”≤n≤”3”)
[Initial Value]
Memory switch setting
[Function] Sets print speed.
This command stops printing to be executed.
Because two-color print mode prints in one speed, the speed settings with this command are
invalid. This command setting becomes valid when returned from the two-color print mode to the
single color print mode.
N Print Speed
Single Color Printing Mode Two Color Printing Mode
0, 48 High speed Two Color Printing Mode Speed
1, 49 Mid-speed Two Color Printing Mode Speed
2, 50 Slow speed Two Color Printing Mode Speed
3, 51 Option speed (differs according to the model) Two Color Printing Mode Speed