IBM SCOD-3ZVQ5W - Manual (Page 354)

346 COG
6. An integrated, single-channel, SAS controller supports integrated RAID-0 and 1. RAID-1E and 5 requires
the optional BladeCenter Storage and I/O Expansion Blade.
7. Maximum internal storage capacity is based on installation of two 73GB SAS HDDs.
8. An optional BladeCenter Storage and I/O Expansion Blade unit is available that attaches directly to the
blade server adding three hot-swap SAS HDD bays for a total of five HDD bays and adds expansion card
slot capacity for a total of three expansion card slots.
9. Maximum capacity is achieved by populating all four DIMM slots with four, 4GB DIMMs and selecting
the IBM BladeCenter Memory and I/O Expansion Blade (42C1600) which adds an additional four DIMM
slots and one I/O expansion card slot, providing a total of eight 4GB DIMMs and three I/O expansion
card slots.
10. 8853-L6Y models are supported in the BladeCenter H (8852) chassis only.
HS21 - 8853 processor options
Notes:
1.
A blade using a single CPU must have it installed in the CPU 1 socket.
2. The system should not be allowed to boot with an empty CPU 1 socket.
3. If the CPU 2 socket is empty, it must have a CPU heat sink filler installed. The CPU heat sink filler is a
baffle which maintains proper airflow through the blade.
4. The CPU heat sink filler is required to be installed in CPU 2 socket.
5. A terminator is not required.
6. Intel Dual Core Processor Model 5160 and the 8853-L6Y models are supported in the BladeCenter H
(8852) chassis only.
Figure 87. HS21 planar
SBB
Number
Option
Number
Feature
Code Processor Options
SMP
Support
40K6907 40K1225 1311 Intel Dual Core Xeon Processor Model 5110 -
40K6911 40K1227 1313 Intel Dual Core Xeon Processor Model 5130 -
40K6914 40K1230 1316 Intel Dual Core Xeon Processor Model 5150 -
42C1621 40K1226 1329 Intel Dual Core Xeon Processor Model 5120 -
42C1622 - 1330 Intel Dual Core Xeon Processor Model 5140 -
42C1623 40K1229 6 1331 Intel Dual Core Xeon Processor Model 5160 -