Motorola 009 - Manual (Page 145)

. . . . .
Transmit Status
Control Panel 145
To set synchronization settings:
1 Select Controls from the Home screen.
2 Select the TrueSync and Partner Settings icon from Control Panel.
3 To require password entry on the device prior to synchronization, select the Prompt for
password when communicating with desktop option.
4 Select the Change password button from the toolbar.
5 In the New password field, type a password.
6 In the Confirm new password field, retype the password.
7 Select the Save settings button on the toolbar to save your changes. Select Save
settings button again to return to the Control Panel. You will be prompted for your
password when the PC desktop application attempts to synchronize with your Accompli
009.
T R A N S M I T S T A T U S
The Transmit Status feature enables you to set your device to the proper transmission mode
before attempting to send or receive messages.
To set the transmission mode:
1 Select Controls from the Home screen.
2 Select the Transmit Status icon from Control Panel.
3 Select one of the following signal modes for message transmission:
4 Select the Save settings button from the toolbar to save your settings and return to the
Control Panel.
Phone mode Voice and data call capable.
PDA mode Voice and data calls cannot be made.
Accompli 009 User's Guide_.book Page 145 Wednesday, June 26, 2002 2:56 PM