Muratec MFX-1300/1700 User Manual
Page 91
Advanced features
5
Press until Communication
appears.
6
Press
ENTER
.The
LCD
now shows either:
or
7
Use the numeric keypad to enter up to 230 fax numbers you can use any com-
bination of call groups, one-touch keys, speed-dial numbers and manually-dialed
numbers.
Important:
D o not press
ENTER
.
Press
B R O A D C A S T
to enter a comma between each number or call group.
Important:
Do not insert a comma after the last number.
To enter a speed-dial number, press
SPEED DIAL
/
TEL INDEX
and the number s three-
digit identifier.
To enter a call group, press
G R O U P DIAL
and the group s identifier number.
Your display can show only 20 characters at a time. To view characters beyond
those 20, press to
scroll to the left or
to scroll to the right.
8
If you want the broadcast to begin immediately every time you press the key,
press
ENTER
and skip to step 11.
If you want to delay the broadcast, press
A D VA N C E D FUNCTIONS
,
ENTER
.
9
Next, tell your fax to carry out this delayed command one of these ways:
Option 1:
Perform the command once at a certain time on a certain day of
the month. (For example, Do this at 5:05
P M
on the 30th. )
To select this option, use the numeric keypad to enter the date and
time when the fax should perform the command:
Option 2:
Perform the command at a certain time each day you press the
key.(For example, Do this at 5:05
P M
today.)
To select this option, use the numeric keypad to enter 0, 0 and then
the time the fax should perform the command:
10
Press
ENTER
,
ENTER
.
11
The
LCD
asks if you want to make additional settings for this programmable one-
touch number.
If you do not want to make additional settings, press
ENTER
.Then skip to step 23.
If you do want to make additional settings, press
and
ENTER
.
12
The
LCD
asks which resolution you want to use for this programmable one-touch
number.
13
Press
until the mode you want appears.
Note:
For any of the following settings, choose ----- if you do not want to spec-
ify the displayed setting for this programmable one-touch key.
14
Press
ENTER
.
The
LCD
asks you to select a contrast mode for each programmable
one-touch number.
15
Press
until the mode you want appears.
16
Press
ENTER
.
The
LCD
asks you for the type of confirmation report you want to set
for this programmable one-touch number.
17
Press
until the mode you want appears.
Report :---
/
/Enter
Contrast :-------
/
/Enter
Resolution :------
/
/Enter
Option :Off
/
/Enter
Delayed
Enter Time: 00/17:05
Delayed
Enter Time: 30/17:05
P2:Fax#/Advan.Func.
G5,G7,[01],S006,9-55
P2:Fax#/Advan.Func.
9-5558743_
P2:Fax#/Advan.Func.
_
Type :Communication
/
/Enter
3.38