Operating tips, Changing modes, Turning off the power – Muratec MFX-1300/1700 User Manual

Page 22: How to operate the machine

1.11

Getting started

Changing modes

You can use this machine not only as a fax
machine, but as a copier as well. Press

C O P Y

FA X

to change to the fax mode or

copy mode.

Fax mode: If you want to use facsimile
features, change to the Fax mode.

Copy mode: If you want to use copier
function, change to the Copy mode.

When the machine is in the Fax mode, the

FA X

light on the control panel is on, and if the machine is in the Copy mode, the

C O P Y

light is on.

Note:

You cannot switch modes in any of the following cases:

When scanning a fax message for transmission.

During the real time transmission.

When programming any function settings.

Standby display of each mode:

In Fax mode

In Copy mode

Turning off the power

Fax documents stored in memory will be lost 72 hours after you turn the power switch
off or unplug the power cord. (See Specifications, page

.1.)

How to operate the machine

To press: 0 (zero), 1, 2, 3, 4, 5, 6, 7, 8, 9, # or *
Use:

The numeric keypad.

Tip:

At no other time within this manual will we refer to the letters printed below
the numeric keys and their uses (such as accessing abc by pressing the 2
key.) These letters are there only for your convenience in using your fax
machine as a telephone.

To press:

or any other letter key

Use:

The one-touch key labeled with that letter.

Tip:

Please don t confuse the zero (0) with the letter

Here s an example. If we say press Program key,

, 1, 0, 1,

ENTER

you d press

Program key

then

(one-touch key 01(A))

then

0 (the numeric key zero)

then

and then

ENTER

Note:

Even though our example above includes commas, do not enter them into the
fax machine. Those characters appear in our instructions to separate one num-
ber from the other.

They do not need to be entered into your fax machine.

There is a function (broadcasting) which requires commas to be entered, but
there is a special way to enter them. We ll explain this process later.

In other way, you can search almost all of your machine s function using the cursor key.
See page 1.13.

Copy Ready 1

Ltr Auto 100%

Fax Ready

Jan 1 2001 0:00

COPY/FAX key

Operating tips