Muratec MFX-1300/1700 - Manual (Page 32)

2.1
Basic operation
Guidelines
You can send a fax message using the ADF (Automatic Document Feeder) or FBS
(Flatbed Scanner) glass. Before you begin the fax sending, please read the following
guidelines.
Acceptable document sizes
You can set up to 50 sheets of letter-, legal- or half letter
−
sized document in the ADF at
one time. However, it s possible to fax a piece of paper as small as a notepad sheet or
one up to three feet long.
The acceptable dimensions (width
×
length) are:
Automatic document feeder ( A D F )
S INGLE - SHEET M ULTIPLE - SHEET
Maximum: 8.5
″ ×
35.4
″
Maximum: 8.5
″ ×
14.0
″
Minimum: 4.7
″ ×
3.9
″
Minimum: 5.8
″ ×
4.1
″
Flatbed scanner ( FBS )
Maximum: 8.5
″ ×
14.0
″
Things not to put in your fax
To avoid paper jams and damage to your machine, don tinsert:
Folded, curled, torn, wrinkled or very thin pages
Documents with staples, glue, tape, paper clips or still-wet correction fluid
Sticky notes (or documents with sticky notes attached)
Cardboard, newspaper or fabric
Pages with duplicating carbon on either side
Credit cards or any small, thick items
O H P transparency film
How to set the document
When setting the documents in the ADF (Automatic Document Feeder)
1 Insert your document(s) face up,
top edge first. If you re sending
a multi-page documents, fan the
pages slightly.
2 Adjust the document width guide
to fit your documents.
Note: The ADF can hold up to 50 pages of normal weight paper.
When setting the documents on the FBS (Flatbed Scanner) glass
1 Make sure the document is not
in the
ADF .
2 Lift the platen cover.
3 Set your document face down
on the
FBS glass. The document
should be aligned to the front
right corner.
4 Gently close the platen cover.
Important: Gently close the platen cover so that you don t catch your hands,
possibly injuring them.
Sending faxes