Tti transmission – Muratec MFX-1300/1700 User Manual
Page 113
Memory transmission
Default setting: O n
Note:
When the machine s memory is full, it can transmit only through the document
feeder (real time transmission).
Note:
When you use the
FBS
glass, the machine always uses memory transmission
even if you set the memory transmission to off
.
To change the default setting of memory transmission:
1
Press Program key,
B
, 2, 0, 6,
ENTER
.
2
Press or
until the mode you want appears.
In this example, we ve chosen Off
.
3
Press
ENTER
to save the setting.
Quick Memory transmission
Default setting: O n
Important:
Your fax machine s memory transmission feature must be turned on to
use Quick Memory transmission (see above).
To change the default setting of Quick Memory transmission:
1
Press Program key,
B
, 2, 0, 7,
ENTER
.The
LCD
shows:
2
Press or
until the mode you want appears.
Here, we ve chosen Off.
3
Press
ENTER
to save the setting.
TTI transmission
Default setting: O n
Every fax page you send arrives at the receiving machine with a single line of text at the
very top of the page. This text lists a name, called the Transmit Terminal Identifier (
TTI
)
,
and a fax number.
You can set the machine to not send the
TTI
.
1
Press Program key,
B
, 2, 0, 8,
ENTER
.The
LCD
shows:
2
Press or
until the setting you want appears. In this example, we ve
chosen Off.
3
Press
ENTER
to save the setting.
TTI Tx :Off
/
/Enter
TTI Tx
:On
/
/Enter
Quick Tx :Off
/
/Enter
Quick Tx :On
/
/Enter
Memory Tx :Off
/
/Enter
Memory Tx :On
/
/Enter
Changing the default settings
4.2