Muratec MFX-1300/1700 - Manual (Page 5)

Power requirements
Plug in the power cord
Plug the power cord carefully and completely into a
wall outlet. Do not leave any portion of the electrical
cord s metal plugs exposed. Doing so could cause a
fire and poses a risk of electrical shock.
Do not share an extension cord
connector with other plugs
It can cause electrical shock.
Do not share an outlet with a large appli-
ance
High-consumption appliances such as a refrigerator
or air conditioner can cause draw-downs which could
damage your fax machine.
120 VA C outlet
Use a standard three-pronged 120 V electrical outlet to
power your fax machine. Using any other electrical
outlet will cause damage to your fax.
For domestic use only
Never use your fax machine outside the country in
which you purchased it. Doing so may violate telecom-
munication and safety regulations of that country, and
variations in electrical and telephone standards can
cause poor performance and damage to your fax.
General Precautions
Never disassemble your fax machine!
Disassembling your fax machine can cause serious
injury to you and damage to your fax. If service is
required, call your authorized Muratec dealer.
Keep away from liquids
Keep liquids and metal pins or other objects away from
your fax machine. If something falls into the fax
machine, remove the plug from the outlet, and call
your authorized Muratec dealer.
Never handle your fax machine or power
cord with wet hands
Never touch your fax machine or power cord if your
hands are wet.
During electrical storms, disconnect the
plug from the outlet
Electrical storms can cause electrical shock or
damage to the fax machine.
AC 120V