Muratec MFX-1300/1700 - Manual (Page 59)

Advanced features
Fax dialing via speed-dial
To dial a fax call using a speed-dial number:
1 Place the document in the ADF ,or on the FBS glass.
2 If you are using the FBS glass, enter the document size by pressing the
D O C U M E N T SIZE .
3 Adjust resolution and contrast if necessary.
4 Press SPEED DIAL / TEL INDEX .The LCD shows:
5 Use the numeric keypad to enter the three-digit identifier (such as 018, in this
example) for the speed-dial number you want to dial. The
LCD shows the Location
ID (or fax number) you stored:
6 Press STA R T .
What happens next depends on whether you specified memory transmission or real
time transmission:
If you specified quick memory transmission:
Your fax machine scans the first page of your document into memory, then dials the
other fax machine.
While dialing, your machine scans the other documents into memory.
The LCD shows the Location ID and the document s width and resolution settings:
Note: If the entry doesn t have a Location ID ,the number appears.
When the other machine answers, your fax transmits the scanned document directly
from memory. (To review Quick memory transmission, see page 2.3.)
If you specified normal memory transmission:
Your fax machine scans your entire document into memory, then dials the other fax
machine.
The LCD shows the Location ID and the document s width and resolution settings:
Note: If the speed-dial entry doesn t have a Location ID ,the number appears.
When the other machine answers, your fax will transmit the document directly from
memory. (To review Memory transmission, see page 2.3.)
If you specified real time transmission:
Your fax machine dials the other fax machine.
The LCD shows the Location ID and the document s width and resolution settings:
Note: If the speed-dial number doesn t have a Location ID ,the number appears.
When the other machine answers, your fax feeds the document through its scanner,
transmitting as it goes. (To review the Real time transmission, see page 2.3)
Phoning via speed-dial
To dial a phone call using a speed-dial number, you must have an optional handset
attached to your machine. To make the call:
1 Obtain a dial tone by doing one of the following:
Lift the handset
Press MONITO R / CALL to use the monitor speaker
2 Press SPEED DIAL / TEL INDEX . The LCD shows:
3 Use the numeric keypad to enter the three-digit identifier for the speed-dial num-
ber you want to dial. As the machine dials, it shows the number on the
LCD :
Note: Remember that your fax machine s monitor speaker is not a speakerphone. I f
you dialed using the monitor speaker, pick up the handset to speak to the per-
son that answers!
Note: If the call fails, and you used MONITO R / CALL to dial, press MONITO R / CALL to hang
up.
** Tel Mode **
9-555-5783_
** Tel Mode **
S_
Plano Office
A4 Normal
Plano Office
A4 Normal
Plano Office
A4 Normal
Plano Office
S018_
Enter Speed-Dial No.
S_
3.6