Muratec MFX-1300/1700 - Manual (Page 103)

Advanced features
6 If you want security reception to begin now (and at this same time every day),
skip to step 8.
Otherwise, go on to step 7.
7 Use the numeric keypad to enter the time (use a 24-hour format) when security
reception should begin every day. Type over the numbers displayed. Here,
we ve entered 17:35:
To change a digit, press to move to the left, or to move right. Then enter the
correct digit.
8 Press ENTER to save the setting.
Helpful tip: After setting for activating the security reception, you can assign the
security reception to the Soft key (see page 3.16) to turn it on and off
.
Turning on the security reception by pressing a Soft key is not effected
the time setting you entered at step 7. It begins the security reception
immediately.
To turn the security reception on by pressing a soft key:
1 Program a Soft key for security reception. (See page 3.16.)
2 Press a Soft key that is assigned for security reception.
3 Enter the protection passcode and then press ENTER .
The LCD briefly shows following and the LED of the Soft key will light and the secu-
rity reception begins immediately.
Note: To turn the security reception off, see Printing from security reception/Turning
off security reception, next column.
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine s mem-
ory and the
M E M O RY RECEIVE light comes on. But the incoming fax message is not
printed.
To retrieve the faxes received during this security reception (and to return your machine
to normal reception until the next time):
1 Press Program key, D , 3, 0, 4, ENTER
If you using the Soft key, press the Soft key instead of this operation.
In which way, the
LCD shows:
2 Use the numeric keypad to enter the passcode. Here we ve entered 6296:
3 Press ENTER .
If you ve entered the correct passcode, your fax machine will print all docu-
ments in its memory and then erase them. Then it will turn security reception
off until the next time you ve scheduled security reception or the Soft key
which programmed security reception is pressed.
If you using the Soft key, the
LED light of the Soft key will be off .
If you ve entered an incorrect passcode, your fax machine will refuse to print,
and security reception remains on.
Security Rx Doc.
Enter Passcode :6296
Security Rx Doc.
Enter Passcode :****
** Sec. Rx Active **
Enter Passcode :****
Security Rx
Enter Time: 17:35
3.50