Muratec MFX-1300/1700 User Manual

Page 85

Advanced features

Press

ENTER

The

LCD

shows:

Note:

If the F-Code security box is not storing any documents, the machine
briefly displays the following before returning to step 2:

Use the numeric keypad to enter your F-Code box s four-digit

code.

Here we ve entered 2345:

Press

ENTER

If you ve entered the correct

code, your fax machine prints all documents

in the F-Code security box and then erases them.

If you ve entered an incorrect

code, your fax machine aborts the operation

and returns to standby mode.

Using a relay box

Once your fax machine receives a document via

ITU

sub-addressing to one of its F-

Code relay boxes, it sends it to the other fax machines that you ve set up on your relay
box. (See Creating or Modifying an F-Code box , pages 3.25 3.29.)

If you set the Auto print mode to on when you created the relay box, your machine will
print the received document, then relay it to the other machine. Otherwise, your
machine will only relay it to the other machines, not print it. See If you chose Relay,
pages 3.28 3.29 for more details on this setting.

Also, you can send (relay broadcast initiation) the document to another hub machine s
F-Code box and get that machine to relay it to others. See F-Code transmission on
pages 3.33 3.34 for more detail.

The hub performs a relay broadcast, and the machine which sends the original docu-
ment to the hub has performed a relay broadcast initiation.

Erasing an empty F-Code box

An F-Code box must be empty in order to erase it. (If you select an F-Code box in these
steps which is not empty, the machine beeps. If this happens, print all documents in that
box before erasing it.)

To erase an empty F-Code box:

Press Program key,

, 4, 0, 2,

ENTER

.The

LCD

shows:

Use the numeric keypad to enter the two-digit identifier number (01-50) of the F-
Code box you want to erase. Here, we ve entered 0,

3 and see:

If you want to erase a different F-Code box than the one that appears on the

LCD

enter the box number now.

Press

ENTER

. If the F-Code box is empty, the

LCD

shows:

Important:

If you select an F-Code box which is not empty, the machine beeps
and, before returning to step 3, briefly displays:

Print any documents received in the F-Code box, then repeat this
procedure from the beginning to erase the box.
Otherwise, select another F-Code box.

Use the numeric keypad to enter the four-digit

code.

Here, we ve entered 2345:

03:Erase F-Code Box
Enter I.D. Code:2345

Select F-Code Box
Box In Use

03:Erase F-Code Box
Enter I.D. Code:****

Select F-Code Box
03:Muratec America

Select F-Code Box
01:Murata Machinery

Select F-Code Box
01:No Number Stored

03:F-Code Document
Enter I.D. Code:2345

03:Select F-Code Box
No Document Stored

03:F-Code Document
Enter I.D. Code:****

3.32