Muratec MFX-1300/1700 - Manual (Page 130)

Just in case
What you see on the LCD What it means/What to do
Macro In Use You tried to change the function for a Soft key, but
that Soft key has been programmed in a Macro
key.
You cannot change the Soft key function until
erase the Macro key that contains the Soft key you
want to change. Erase the Macro key, then try
again.
Memory Overflow During transmission (or copying), you tried to
Start Or Cancel enter more pages into memory than your fax could
store. Press
STA RT to tell your fax to keep as many
pages in memory as possible, or press C A N C E L to
delete from memory all pages stored during this
operation (but not previous operations).
Mirror Carriage Error The mirror carriage of your machine has become
inoperable. Call your authorized Muratec dealer or
Muratec Customer Support.
Mirror Locked The transport mode is not turned off .
Turn off the transport mode (see page 1.8).
No Command You pressed REVIEW C O M M A N D S to review upcoming
commands, but your fax machine had none
stored.
No Department Code You tried to turn on the department code setting
but there are no department codes stored in your
fax machine. Store at least one department code,
then try again.
. . . or . . .
You entered incorrect department code at fax
sending while the department feature is on. Enter
correct department code.
No Document Stored You tried to print a document from memory, but
your fax machine had none stored.
No Drum The drum cartridge is missing or has not been
properly installed in your fax machine.
Please properly install the drum cartridge.
No Number Stored You selected an autodialer, batch box or F-Code
box number for which there is no fax (or phone)
number programmed. Either choose another num-
ber or dial a phone number directly from the
numeric keypad.
What you see on the LCD What it means/What to do
No Passcode You tried to program a security feature (see page
3.49), but there s no protection passcode stored in
your fax machine. Store a protection passcode in
your machine, then retry again.
No PIN Number You selected Mode1 in the PIN mask feature and
tried to call an autodialer number in which no PIN
has been entered, or to call using numeric keypad
without
PIN . Enter a PIN , then try again.
No Report You requested an activity journal or confirmation
report, but your fax machine has no record of any
fax jobs having occurred.
No Toner Cartridge The toner cartridge is missing or has not been
properly installed in your fax machine. Please
properly install the toner cartridge.
Not Allowed in Macro During macro registration, you pressed the key
which cannot be registered in Macro, such as
Monitor/Call key or Security Reception key.
Other Key Setting You tried to enter the same function which is
already stored in other Soft key.
Store the different function.
Open Top Cover The paper is jammed in your fax machine.
Please Remove Paper Open the cover indicated on the LCD, and
Open 1st Side Cover remove the jammed paper carefully.
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
Open&Close ScanCover Either your document wasn t inserted correctly,
Reset Document or the fax to which you re sending can t handle the
document s page length
. Reset the page and try
again.
Please Call Service The printer unit of your fax machine has become
inoperable. Call your authorized Muratec dealer or
Muratec Customer Support.
5.7