Setting block junk fax – Muratec MFX-1300/1700 User Manual

Page 106

Advanced features

Press

ENTER

to save the setting.

Note:

If you press

ENTER

without entering the

, the fax machine beeps, indi-

cates No

Number on the

LCD

and then returns you to step 2.

Continue with the steps for creating or modifying a batch box (pages 3.11 3.12).

Now you can perform batch transmission to this box while the

mask is activated.

Setting Block Junk Fax

Your fax machine s Block Junk Fax feature lets you bar the gates against unauthorized
incoming faxes ( junk fax ). But before you block junk fax, first understand how this fea-
ture works, to determine if it s right for you. There are four possible settings for Block
Junk Fax:

Off

The feature isn t activated.

Mode1

Your fax machine checks whether the last four digits of any phone number

in your autodialer matches the last four digits of the remote fax s subscriber

(the

phone number part of the

TTI

). If it doesn t find a match, your machine disconnects

the call.

Mode2

This mode rejects any call from a number whose last eight digits match

any number in the blocked numbers list (explained later). Your machine can hold up
to 50 blocked numbers.

Mode3

This rejects numbers that are not in the autodialer and also rejects numbers

that are in the blocked numbers list. This lets you keep a number on your autodialer
for transmission to it, while still blocking its incoming calls by putting it in the blocked
numbers list.

But before you activate the Block Junk Fax feature, please consider:

Not all fax machine owners enter their phone numbers in their Subscriber

W ith Block Junk Fax activated, your machine would reject faxes from these
machines.

Access codes can cause confusion. If an autodialer entry ends with extra codes,
such as long-distance codes, Block Junk Fax will block out calls from those faxes.

To set Block Junk Fax:

Press Program key,

, 2, 1, 0,

ENTER

.The

LCD

shows your fax s current setting:

Press or

until the mode you want appears.

Here, we ve chosen Mode2.

Press

ENTER

to save the setting.

What you do next depends on what you selected in step 1:

If you selected Off or Mode1, press

STO P

to return to standby mode.

If you selected either Mode2 or Mode3, go on to step 4.

Block Junk Fax:Mode2

/Enter

Block Junk Fax:Off

/Enter

3.53