Muratec MFX-1300/1700 - Manual (Page 28)

Level one function Level two function Level three function Summary of setting Default setting Page
E.Print 1.List Print 09.Group List Print a list of the group numbers. 3.7
10.Block Junk Dial List Print a list of the blocked numbers. 3.54
11.Cover Page Print a cover page. 3.22
12.Depart. Time List Print a total communication time and printed pages of each
3.56
department code.
13.F-Code Box List Print a list of F-Code boxes. 3.29
14.F-Code Doc. List Print a list of the document stored in the F-Code boxes. 3.29
15.Batch Box List Print a list of Batch boxes. 3.12
16.Batch Doc. List Print a list of the document stored in the batch boxes. 3.12
17.Macros List Print a list of Macro keys. 3.19
2.Printer Functions 01.Demo Page* 4 Print the highlight features and functions of the printer.
02.Status Page* 4 Print all the status and configuration of the printer.
03.Font List* 4 Print the list of all PCL fonts currently installed in the printer.
04.NIC Status* 5 Print the NIC (network interface card) settings.
F. PC-FAX Commands* 6 1.PC-FA X 01.PC-FAX Scan Scanning a document into the PC.
02.PC-FAX Initial Initializing your machine.
03.Set RS-232C Setting of the RS-232C parameters.
I. User Install Set-up the following settings:
Language on the LCD and Lists English
Current Day and Time
Automatically Daylight saving time Off 1.18
Your TTI (your name)
Subscriber ID (your fax number)
Phone dialing type
Tone
Fax reception mode Fax Ready
Time for the machine to enter the sleep mode 5 minutes
1.17
Getting started
*4:These option appears only if the optional printer controller has been installed.
*5: This option appears only if the optional NIC (network interface card) has been installed.
*6: This option appears only if the optional RS-232C interface has been installed. For details see the operating instructions that is included with the optional RS-232C kit.