Muratec MFX-1300/1700 - Manual (Page 86)

6 Press ENTER .
If you ve entered an incorrect I . D . code, your fax machine rejects the attempt and
returns to standby mode.
If you ve entered the correct
I . D . code, the display shows:
Note: If you want to quit without erasing the F-Code box you ve selected, press
C A N C E L . The fax will return to step 2.
Note: If you want to quit without erasing any F-Code box, press STO P .
The machine returns to standby mode.
7 Press ENTER to erase the F-Code box.
To erase another F-Code box, repeat steps 2-7.
To finish, press
STO P .
F-Code transmission and polling
W ith F-Code, your machine can send secure transmissions, perform relay broadcast ini-
tiations and even poll from other
ITU - T -equipped machines, regardless of manufacturer.
You can do this two ways:
Using the programmable one-touch key (see pages 3.40 3.43)
Entering the ITU - T sub-address and password directly, which is what we ll describe
here.
Note: For F-Code communication to work, three things must be true:
The remote fax machine must support ITU - T sub-addressing
The remote fax must have a mailbox with an ITU - T sub-address created on it
You must know the ITU - T sub-address and password (if any) for the remote
machine s mailbox
F-Code transmission
1 Insert the document.
2 Adjust the resolution and contrast if necessary.
3 If you want to toggle between real time transmission and memory transmission,
press
M E M O RY TRANSMIT .
4 Press A D VA N C E D FUNCTIONS three times and then press ENTER .
5 Use the numeric keypad to enter the appropriate sub-address in the remote
machine. In this example, we ve entered 123456.
Note: If you make a mistake, press C A N C E L to erase the character, then enter
the correct number.
6 Press ENTER . The LCD shows:
Note: If this sub-address does not have a password, skip to step 8.
7 Use the numeric keypad to enter the password. In this example, we ve entered
654321.
8 Press ENTER . The LCD shows:
9 Enter the fax number either by pressing a one-touch key, entering a speed-dial
number or dialing from the numeric keypad. Do not press
STA R T .
10 What you do now depends on when you want the transmission to begin.
To have it begin now, skip to step 13.
To delay it, go on to step 11.
11 Press A D VA N C E D FUNCTIONS , ENTER . The LCD shows:
12 Use the numeric keypad to enter the day and time when the transmission should
begin, then press
ENTER .
13 Press STA R T .
Delayed
Enter Time: 15/17:05
Enter Fax Number
_
Enter Password
654321_
Enter Password
_
Enter Sub-Address
123456_
Enter Sub-Address
_
Erase F-Code Box
** Complete **
03:Erase F-Code Box
Check Enter/Cancel
Advanced features
3.33