Using the bypass tray – Muratec MFX-1300/1700 User Manual
Page 45
2.14
Basic operation
5
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
6
Press
STA R T
.
Note:
To reset the copy parameter to default setting, press
C O P Y RESET
.
Note:
To stop the copying, press
STO P
.
Using the bypass tray
When you need to use a size of paper not currently loaded in your machine s paper cas-
sette(s), or when you want to use a special type of paper (such as transparency film),
use the bypass tray.
Important:
If loading transparency (OHP) film into the bypass tray, be sure that the
sheet is designed for laser printers and not for copiers. Also, be sure that
the film does not have a paper backing and/or a leading strip. If it does,
remove the paper backing and/or strip before inserting. Only film should
go in, not film with any backing or strip.
1
Either insert the document in the
A D F
or place it on the
FBS
glass.
2
Set the paper in the bypass tray.
See the table of Acceptable paper size and cassette capacity on page 1.8 and
Loading paper in bypass tray on page 1.10 for more information.
Note:
Place the original document in the same orientation as the paper in the
paper source.
3
The machine will select the bypass tray for the paper
source and the
LCD
will show the default paper size you
have set in step 6 on page 1.10.
If you want to change it, proceed to step 4.
Otherwise, skip to step 10.
4
Press
B Y PA S S
to change the paper size. The
LCD
will show:
5
If your recording paper on the bypass tray is Letter, Legal or Half-letter, proceed
to step 6. Otherwise, skip to the step 7.
Note:
When you use transparency film, skip to step 8 and select OHP in step
9.
6
Press or
until your desired recording paper size appears. Here, we ve cho-
sen Legal:
Skip to step 9.
7
Press or
until Other
appears.
Then press
or
ENTER
.
You will see:
8
Press or
until your desired recording paper size appears. Here, we ve cho-
sen Postcard:
9
Press
ENTER
.
10
If necessary, select desired resolution, contrast, reduction/enlargement ratio.
11
Press
STA R T
to begin the copying process.
Set Bypass Ppr:Post
/
/
/Enter
Set Bypass Ppr:Exe
/
/
/Enter
Set Bypass Ppr:Other
/
/
/Enter
Set Bypass Ppr:Legl
/
/Enter
Set Bypass Ppr:Ltr
/
/Enter
Copy Ready 1
[ Ltr ] Ltr 100%