Muratec MFX-1300/1700 User Manual
Page 87
Advanced features
If in step 10 you chose an immediate transmission, your fax machine begins dialing. If
you chose a delayed command, the machine shows Reserved on the
LCD
, indicating
that it has stored the command in memory and will complete it later.
F-Code polling
1
Press
FA X
to switch the machine to Fax mode.
2
Press
A D VA N C E D FUNCTIONS
four times and then press
ENTER
.
3
Use the numeric keypad to enter the appropriate sub-address.
In this example, we ve entered 123456.
Note:
If you make a mistake, press
C A N C E L
to erase the character, then enter
the correct number.
4
Press
ENTER
.
The
LCD
shows:
Note:
If this sub-address does not have a password, skip to step 6.
5
Use the numeric keypad to enter the password. In this example, we ve entered
654321.
6
Press
ENTER
.
The
LCD
shows:
7
Enter the fax number either by pressing a one-touch key, entering a speed-dial
number or dialing from the numeric keypad. Do not press
STA R T
.
8
What you do now depends upon when you want the polling to begin.
To have it begin now, skip to step 11.
To delay it, go on to step 9.
9
Press
A D VA N C E D FUNCTIONS
,
ENTER
.
The
LCD
shows:
10
Use the numeric keypad to enter the day and time when the polling should begin,
then press
ENTER
.
11
Press
STA R T
.
If in step 8 you chose an immediate polling, your fax machine begins dialing. If you
chose a delayed command, the machine shows Reserved on the
LCD
, indicating that it
has stored the command in memory and will complete it later.
Delayed
Enter Time: 15/17:05
Enter Fax Number
_
Enter Password
654321_
Enter Password
_
Enter Sub-Address
123456_
Enter Sub-Address
_
3.34