Muratec MFX-1300/1700 User Manual

Page 81

Advanced features

Erase Tx Doc

Erasure of transmitted documents tells your machine if it should

erase a document from the box after a caller retrieves (polls) the
document.

On:

Your machine erases the document from the box as soon as it sends it. If
you choose On , this box can be polled only once per document.

Off

Your machine does not erase a document from the box when it s polled. As
long as your machine holds

A C

power and you do not erase the document

from the box, the document is available indefinitely for polling.

Press or

until the mode you want appears.

Press

ENTER

to save the setting. Then skip to step 24.

If you chose Security:

The machine asks how long you want to keep a document stored in your
machine s F-Code box. The

LCD

shows:

Use the numeric keypad to enter a two-digit number indicating how many days
(00-31), you want your fax machine to keep received documents in this F-Code
box. Here, we ve entered 09, for nine days:

Note:

Your fax machine can store incoming documents in F-Code boxes (up to
30 documents) as long as 31 days, after which it automatically erases the
documents. But if your machine has plenty of memory, you may want to
override the 31-day limit in order to keep the documents indefinitely. If so,
enter 00. If you choose this, you will have to delete documents manually.
(You may want to contact your authorized Muratec dealer regarding
optional memory expansion.)

Press

ENTER

to save the settings. Skip to step 24.

If you chose Relay:

The machine asks for the fax number for the remote unit.
The

LCD

shows:

Enter the fax number using a one-touch key, a speed-dial number or a call group
number.

You cannot use the numeric keypad to enter these numbers.

To add each fax number, press

B R O A D C A S T

between each one to insert a comma,

then enter the number.

You can specify up to 200 numbers for a remote unit.

Press

ENTER

to save the settings. The

LCD

shows:

The machine asks for the type of

TTI

you want to appear on the faxes that are

relayed to other callers.

Sender Relay the document with sender unit s

TTI

(don t send your

TTI

)

Both Relay the document with both the sender unit s

TTI

and your

TTI

Yours Relay the document with your

TTI

instead of the sender unit s.

Press or

until the mode you want appears.

Press

ENTER

to save the settings. The

LCD

shows:

On: Print the document automatically when it s received.
Off

: The machine does not print it, but only relays it to the other machine.

Press or

until the mode you want appears.

Then press

ENTER

to save the settings and go on to step 24.

The machine asks for your F-Code box s four-digit security

code. This is the

code for the box s security, which you use to (1) print a document any remote

F-Code-compatible fax sends to this F-Code box or (2) you enter before you can
make any changes to this F-Code box.

If you do not want to change the

code, skip to step 27.

Decide on a four-digit

code (0001-9999) for this F-Code box.

W rite it down, and put it in a safe place.

Important:

Do not use 0000 as an

code.

03:Set F-Code Box
Enter I.D. Code:0000

Auto Print

:Off

/Enter

Select TTI

:Sender

/Enter

Enter Relay Number
S001,G12_

Enter Relay Number
_

F-Code Doc Hold Time
Hold Time (00-31):09

F-Code Doc Hold Time
Hold Time (00-31):00

Erase Tx Doc. :Off

/Enter

3.28