Muratec MFX-1300/1700 - Manual (Page 125)

Just in case
If a printout jams inside your machine
To clear a printout jammed inside your machine:
Important: Be careful not to put your hand between the top cover and the machine.
1 Open the top cover.
2 Open the printer cover.
3 Remove the toner and drum cartridge.
Important: Shield the drum cartridge
from light, especially strong
light. Later, if you have to
remove the cartridge from
the fax, immediately wrap it
in a thick cloth to protect it
from light.
4 Remove the jammed paper.
Important: The fuser unit becomes
very hot.
Do not touch the fuser unit
when you are removing a
paper jam.
Note: Avoid getting unfixed toner on
your hands and clothes.
Open the side cover.
Pulling up the jam release lever to remove
the jammed paper.
5 Reset the toner and drum cartridge.
6 Gently close the printer
cover, pressing firmly on the
both sides of the printer
cover until you hear it click.
7 Gently close the top cover,
pressing firmly on the both
sides of the top cover until
you hear it click.
5.2