Muratec MFX-1300/1700 User Manual

Page 15

1.4

Getting started

C O P Y RESET

Use in copy mode only. Press to reset the copy settings to their

defaults.

Numeric keypad Just like the numeric keys on a regular tone-dialing phone.
Use these to dial phone and fax numbers and to enter numbers when you re set-
ting up the machine.

In Fax mode:

SPEED DIAL

TEL INDEX

Starts a speed-dialing operation, which you finish by

pushing three of the keys on the numeric keypad. Also displays one-touch and
speed-dial entries sorted alphanumerically, as in a telephone directory. (See page
3.8.)

Or, in Copy mode:

Z O O M

Press to turn on or off the

Z O O M

light.

When the

Z O O M

light glows, you can set the copy reproduction ratio at 1% steps

by using

or key.

When the

Z O O M

light is not lit, you can choose one of several fixed copy repro-

duction ratio by using

or key.

Program key

Any function can be started by first pressing this key and then

entering the function number.

Cursor Keys

Scrolls (moves) through features and command options as dis-

played on the

LCD

ENTER

It confirms user settings, begins operations and moves through com-

mand levels.

C A N C E L

Press to delete characters on the

LCD

and cancel commands you have

entered into the machine.

PA P E R SIZE

NEXT D O C

In Copy mode:
Selects the printout paper you want to use.

While scanning a document:
Press to tell your machine to scan one or more additional documents after the
current scanning ends.

D O C U M E N T SIZE

Instructs the fax to scan letter-, legal or half-letter sized docu-

ments when you use the

FBS

(flatbed scanner) glass.

Liquid crystal display (

L C D

) Shows the machine s status and lets you see

what you re programming into the machine. The display shows 2 lines, 20 char-
acters per line. If the

LCD

is blank, the machine is off

Printer status lights Green lights indicate the acceptable paper sources. Red
light will glow if the printer problem (such as paper jam) occurred.

C O N T R A S T

Press to adjust the contrast level.

D O C U M E N T

RESOLUTION

In Fax mode: Press to toggle among the three resolution modes and grayscale.

Or, in Copy mode: Press to select the type of your document.

C O P Y

FA X

Press this key to toggle between Fax mode and Copy mode.

Macro Keys Programming the Macro keys (

1 and

2) can reduce many

steps of the operation to a simple press of a key.

You can teach the Macro keys

to carry out one of the several operations (see pages 3.17 3.19).

Programmable One-Touch Keys

The keys labeled P1 and P2, this lets you

teach your machine an advanced multi-step function just once, then recall the
function at any time by pressing one of these keys.

One-Touch Keys

The keys labeled 01-55 offer one-touch dialing conve-

nience. Also, you may use these keys to enter the characters when you are
setting up the machine.

fliptab A

fliptab B

fliptab C