Muratec MFX-1300/1700 - Manual (Page 17)

1.6
Getting started
Installing the printing supplies
Your fax prints incoming faxes and copies with a reliable 600 dpi print engine. Your fax
requires two types of printing supplies (sometimes also called consumables):
The drum cartridge It yields 20,000 normal letter-sized printouts (see
Specifications, page AI .2). By normal, we re referring to the amount of text and/or
graphics on each page. This is based on an industry-standard test document.
The toner cartridge It yields 16,000 normal , letter-sized printouts (see
Specifications, page AI .2).
Note: The toner cartridge included with your machine is starter toner cartridge, which
yields 3,000 printouts. Please purchase regular, full-yield toner cartridge from
your authorized Muratec dealer.
To install these supplies:
Important: Gently close the top cover so that you don t catch your hands, possibly
injuring them.
1 Pull up the top cover
release and open the top
cover.
2 Slide the printer cover
release and open the
printer cover.
3 Unpack a new toner cartridge from its car-
ton. Then, holding the toner cartridge with
both hands, slowly shake it to distribute
the toner evenly inside the cartridge.
Note: Do not touch the roller of the
toner cartridge.
4 Gently install the
toner cartridge in the printer, making
sure the toner cartridge s two pins fit in
the slits inside the printer frame.
5 Unpack the drum cartridge from its carton.
Note: Shield the drum cartridge from light, especially strong light. Later, if you
have to remove the cartridge from the machine, immediately wrap it in a
thick cloth to protect it from light.
6 Gently install the drum cartridge in the
printer, making sure the drum car-
tridge s four pins fit in the slits inside the
printer frame.