Easystart (initial settings), Getting started, Clearing stored settings – Muratec MFX-1300/1700 User Manual
Page 29: Entering initial settings
EasyStart software is already installed on your Muratec fax machine. It guides you
through the process of entering your machine s settings.
These settings you make here can always be changed later.
Getting started
Determine the following before you go any further:
1
The type of dialing your telephone system requires Choose either tone or
pulse (rotary) dialing.
2
The name and fax number you want to appear on your faxes
Every fax page you send arrives at the receiving machine with a single line of text
at the very top of the page. This text lists a name, called the Transmit Terminal
Identifier (
TTI
),
and a fax number.
The
TTI
cannot be longer than 22 characters.
Clearing stored settings
Before using EasyStart, clear your machine s built-in user data memory.
This ensures
the memory will hold only your settings.
Important:
After you use EasyStart, do not clear the memory again unless an autho-
rized technician asks you to do so.
To clear the machine s memory:
1
Press Program key, *, 2.The
LCD
now asks if you want to clear the memory:
Note:
If you don t want to clear the memory, just press
C A N C E L
.
2
If you do want to clear the memory, press
ENTER
.
Entering initial settings
Important:
If you press
STO P
during EasyStart, your fax machine returns to standby
mode (
i
ts normal condition). But it will keep the settings you saved by
pressing
ENTER
as described in these instructions.
1
Press Program key,
I
,
ENTER
.
The
LCD
shows the current language setting.
2
Press or
until the language you want appears.
3
Press
ENTER
to save the setting and continue EasyStart.
4
The
LCD
now shows the current calendar/clock setting, with a cursor appearing
under the first digit.
5
Use the numeric keypad to enter the correct date and time, using a
M M D D Y Y
format
for the date and 24-hour format for the time. For instance, to set 8:30
P M
on June
11, 2002, press 0 6 1 1 0 2 2 0 3 0, which results in:
Note:
Your fax machine automatically inserts the spaces and date-slash. All you
have to do is enter the digits.
To change a digit, press
to move the cursor left, or
to move it right.
Then enter the correct digit.
6
Press
ENTER
to save the clock setting and continue.
Enter Time
06/11 ’02 20:30
Enter Time
01/01 ’01 00:00
Language
:English
/
/Enter
Clear User Settings
Check Enter/Cancel
EasyStart (Initial settings)
1.18
Getting started