Muratec MFX-1300/1700 - Manual (Page 38)

2.7
Basic operation
3 Your machine can remember the last 10 dial numbers. Press or until the
dial number you want to redial appears.
4 Press STA R T .
To redial a fax call manually with the MONITO R / CALL key or an optional
handset:
1 Make sure the document is in the ADF and that the resolution and contrast are
set.
2 Press MONITO R / CALL or lift the optional handset to get a dial tone.
Note: If you want to use MONITO R / CALL key, you should assign it to a Soft key in
advance. (See page 3.16.)
3 Press REDIAL / PA U S E . The LCD will show:
4 Your machine can remember the last 10 dial numbers. Press or until the
dial number you want to redial appears.
5 When you hear fax tones from the remote unit, press STA R T .
Note: If a person answers the phone, use the optional handset to tell that per-
son you re sending a fax. When you hear fax tones, press
STA R T .
To redial a voice call manually using the optional handset:
1 Lift the optional handset to get a dial tone.
2 Press REDIAL / PA U S E . The LCD will show:
3 Your machine can memory the latest 10 dial numbers. Press or until the dial
number you want to redial appears.
4 Press STA R T .
When the other person answers, use the optional handset to speak to that per-
son.
Reviewing or canceling commands
Your fax machine can store many jobs in its memory. And it keeps track of each one
by assigning it a command number, like C01.
Delayed commands, redial attempts and current fax transmissions are all stored in your
fax machine s memory and given a command number.
Your machine can store up to 99
delayed commands. It identifies each by a two-digit command number ranging from 01 to
99.
The Review Commands function gives you the power to check on each job (or
command) in your machine s memory. It also lets you cancel a command if you decide
not to send the document.
To see your machine s stored commands or to cancel them:
1 Press C O M M . C A N C E L / CONFIRM .The LCD will show:
The LCD shows the first command, indicated by its command number and the
phone number it will dial.
If your machine is attempting to perform a command now, it appears on the
display.
Note: If there are no stored commands in your machine, the LCD will show:
Press STO P to return to standby mode.
Or, if you want to see the result of fax transaction, press C O M M .
C A N C E L / CONFIRM .(See View the result of fax transaction on page 2.9.)
Here, you see command 01, followed by the number it s set to dial. If the com-
mand is to send a broadcast, Broadcast appears instead of the phone number.
(See Broadcasting,
page 3.9.)
If the command is to send a batch transmission, the LCD shows its batch box
number (such as B01 ) rather than the command number. (See Batch transmis-
sion, pages 3.11 3.13.)
If the command is for a Call group dialing, the group number (such as G01 )
appears instead of the phone number. (See Call group dialing, page 3.7.)
2 Press or to scroll through currently stored commands.
No Command
C01:5552009
/ / /Cancel
View Redial History
0:1234567890
View Redial History
0:1234567890