Special copy function – Muratec MFX-1300/1700 User Manual
Page 48
2.17
Basic operation
Special copy function
Negative/Positive (reversing black and white areas)
If using this feature, the black and white areas of the original are reversed.
Note:
You cannot combine this feature with Reduced or Enlarged copies.
Helpful tip:
If you programmed a Soft key to turn on or off this feature, simply press-
ing that key will turn on or off this feature.
1
Make sure the machine is in the Copy mode.
2
Place your original document in
ADF
face up, or on the
FBS
glass face down.
3
Enter the document size by pressing the
D O C U M E N T SIZE
.
4
Press
A D VA N C E D FUNCTIONS
,
ENTER
.
The
LCD
shows the current setting:
Note:
This feature is Off for default setting. However, you can turn it on for the
default. (See page 4.7.)
5
Press or
until the setting you want appears.
In this example, we ve chosen On.
6
Press
ENTER
to save the setting. The machine returns to the standby mode with
following display:
7
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
8
Press
STA R T
.
Note:
To reset the copy parameter to default setting, press
C O P Y RESET
.
Note:
To stop the copying, press
STO P
.
Combine
(This mode is available only on the MFX-1700.)
This feature allows you to copy from four one-sided origi-
nals to one sheet of paper.
Note:
When using the Combine mode, the magnification
ratio is automatically set to 50%. However, you
can change it manually from 50 to 200 % if you
want.
Note:
Although you can use Combine with the Ultra copy resolution, part of original
image might be not copied. Ultra copy resolution only allows you to copy docu-
ments at 100 %. Images cannot be enlarged or reduced.
1
Make sure the machine is in the Copy mode.
2
Place your original document in
ADF
face up, or on the
FBS
glass face down.
3
Enter the document size by pressing the
D O C U M E N T SIZE
.
4
Press
COMBINE
.
The machine will return to the standby mode with following dis-
play:
Note:
I
f
COMBINE
is not assigned to a Soft Key, press
A D VA N C E D FUNCTIONS
twice,
ENTER
.
Then select O n by using the cursor key and press
ENTER
.
(See
page 4.8 to change the default setting.)
5
As needed, set the following:
Document type and Image contrast
Number of copies
Copy reduction or enlargement ratio (50 200%).
6
Press
STA R T
.
Note:
To reset the copy parameter to default setting, press
C O P Y RESET
.
Note:
To stop the copying, press
STO P
.
Copy
Ltr Auto 50%
Copy
Ltr Auto 100%
Nega/Posi :On
/
/Enter
Nega/Posi
:Off
/
/Enter