Muratec MFX-1300/1700 - Manual (Page 47)

2.16
Basic operation
Recording paper size
As default, your machine selects the paper source automatically, however if you wish to
select the paper source manually, press
PA P E R SIZE repeatedly until your desired paper
size is displayed. The LCD toggles the paper size in the 1st cassette, 2nd cassette (if
installed), the bypass tray and Auto select mode.
Note: If the bypass tray has no paper, the LCD shows None for the paper size of the
bypass tray.
Note: When you choose the auto paper select mode, the LCD
shows Auto and the all LED of the paper source will be
lit.
However, if the bypass tray has no paper and the optional
2nd paper cassette has not been installed,
the machine will show the [(paper size)]
instead
of Auto although you select auto paper select mode.
And it lights the LED of the paper source that can be used
only.
Select Document type
P H O TO Select this mode when copying photographs or draw-
ings.
P H O TO / TEXT Select this mode when copying documents con-
taining photographs or drawings with letters.
TEXT Select this mode when copying letters.
To select the document type, press D O C U M E N T repeatedly.
A glowing LED indicates the machine is using the setting named by that LED .
Adjust image contrast
Setting the contrast allows you to compensate for any excessive light or darkness, of
the document pages you are copying.
To change the contrast setting, press C O N T R A S T repeatedly.
A glowing LED indicates the machine is using the setting named by
that LED .
Note: To avoid confusing the Light and Dark settings, just
remember Light
lightens and Dark darkens to
keep it straight.
CONTRAST
NORMAL
LIGHT
DARK
PHOTO
DOCUMENT
PHOTO
/TEXT
TEXT
RESOLUTION