Adept s1700D Viper - Manual (Page 25)

Shipping Bolts and Brackets
Adept Viper s1700D Robot User’s Guide, Rev A 25
• The shipping brackets (A and B) are painted yellow (see Figure 2-3 on page 24 ).
• A hexagon socket head cap screw (M8) is attached at point A, and two hexagon
socket head cap screws (M6) are attached at point B, as fixing jigs (see Figure 2-3
on page 24 ).
• A rubber cushion is wedged at points C and D (see Figure 2-3 on page 24 ).
CAUTION: Before turning on the power, make sure that
the robot is securely mounted to its mounting base and
that the shipping bolts, brackets, and rubber cushions
have been removed. Then store these parts for future use
(in the event that the robot must be moved again).