4 issued 3-78 – Generac Power Systems TXP User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Oil the crankshaft crankpin. Pull
connecting rod against crankpin and
install end caps so that their ass
embly marks are aligned. Install
oil dipper. Install special hardened
washers under bolt heads. Install
bolts and tighten to 190 Inch-Pounds.
Rod must be able to move sideways on
the crankpin after torquing.
19070 PISTOH RIMC
COMPRESSOR
10.4
Issued 3-78