IntelliTrack WMS – Warehouse Management System - Manual (Page 130)

I NTELLI T RACK WMS: W AREHOUSE M ANAGEMENT S YSTEM V 8.1
User Manual
104
Specifying the Replenishment Sequence
When you restock a forward pick (or prime) location, you are able to use a
replenishment sequence to guide you in the put away process. The replen-
ishment sequence is an inventory move based on the pick sequence of the
bulk storage location. When replenishing a forward pick location, an item
location may be specified. If replenishment is implemented:
• WMS sorts items requiring restock in a sequence based on locations
where the bulk stock resides and the pick sequence assigned to that
location.
• WMS guides the picker to the lowest picking sequence location for the
first item requiring restock.
• To exclude locations like Totes and Staging areas (REC and STG)
from the sequencing, enter a number in the Pick Sequence field (such
as zero) that is outside the sequence.
Implementing Location Sequencing
To implement location sequencing, a pick and/or put away sequence num-
ber is assigned to a location. (The lower the location sequence number,
the higher it’s priority as a pick or put away location.)
Location sequencing is implemented in the Locations form:
1. If you are assigning a pick sequence number to a location, enter the
location’s pick sequence number inside the Pick Sequence field.
2. If you are assigning a put away sequence number for this location, enter
the put away sequence number in the Put Away Sequence field.