A-17 2. commercial power source switching – Hitachi J300U Series User Manual

Page 129

Text mode
Original mode

A-17

2. Commercial power source switching

F-SET-SELECT TRM

F/R-SELECT TRM

IN-TM3 CS

NOTE: Allocate the commercial power source switching input terminal CS to one of the input terminal settings 1
to 8 (IN-TM1 to IN-TM8). In this example, the terminal CS is allocated to the input terminal setting 3.

Digital operator

Remote operator (DOP)

or copy unit (DRW)

Function code

Extension
function code

Set the terminal mode.

Select the CS terminal.

Set TRM (terminal mode).

Select the CS terminal.

Monitor mode

Function mode F-34

NOTE: Allocate the commercial power source switching input terminal CS to one of the input terminal settings
1 to 8 ( C 0 to C 7 ). In this example, the terminal CS is allocated to the input terminal setting 3.

Run command to Frequency command to

Set value

Terminal Terminal

Function name

Terminal rating plate

Set value

Input terminal setting 3

Data set for commercial power source switching