Hitachi J300U Series User Manual

Page 125

A-13

Select

2 by

5 9

running mode selec-

tion.
Running mode selection

0: Normal running
1: Energy conservation running
2: Fuzzy most suitable acceleration and

deceleration running

When the running starts after the data is set, the
most suitable acceleration and deceleration
running is performed.

[Setting method]

(1) Digital operator

(2) Remote operator

F-10 running mode selection is displayed. Dis-
play the RUN MODE screen and select “GOD”.

Running mode selection

NOR: Normal running
OEN: Energy conservation running
GOD: Fuzzy most suitable acceleration and

deceleration running

When the running starts after the data is set, the
most suitable acceleration and deceleration
running is performed.

* When the running starts after the data is set,

the acceleration and deceleration time display
is as shown below. During the fuzzy most
suitable acceleration and deceleration running,
the acceleration and deceleration time display
in the monitor mode is invalid. (The time can
be set but the display is invalid. It becomes
valid once again during the normal running.)

➤

F-10

RUN

MODE

FUNC

NOR

OEN

➤

RUN

GOD

FS0000.00

0.0Hz

MODE

STR

MON

GOD

Initial display

➤

FUNC