TA Triumph-Adler DC 2325 - Manual (Page 97)

Sending Functions
ADVANCED OPERATION GUIDE 2-23
2
Sharpness
Select the sharpness of the image outline.
The table below shows the available settings.
NOTE: You cannot specify the sharpness if you selected [Monochrome]
in Color Selection (see page 2-25).
Use the procedure below to set the sharpness when sending scanned
images.
1 Place the originals on the platen.
2 Press the Send key.
3 Press [Color/Image] and then [Sharpness].
4 Press [-3] to [+3]
(Unsharpen-
Sharpen) to adjust
the sharpness.
5 Press [OK].
6 Specify the destination, and press the Start key to start sending.
Item Detail
Sharpen Emphasize the image outline. Make letters and
lines appear sharper.
Unsharpen Blur the image outline. Can weaken a Moire
effect (grids appearing as wavelike patterns
when scanning printed photos).
Status 10/10/2007 10:10
Ready to send. Destination
Add Shortcut Cancel OK
Sharpen
Sharpness
Place original .
Unsharpen
0 +1 +2 +3 -1 -2 -3
1
Press [OK] to display
the image.