TA Triumph-Adler DC 2325 - Manual (Page 48)

Copying Functions
1-34 ADVANCED OPERATION GUIDE
3 Select the desired
Duplex mode.
4 If you choose [1-sided>>2-sided], [2-sided>>2-sided] or [Book>>2-sided],
select the binding edge of the finished copies in Finishing.
5 If you choose [2-
sided>>2-sided], [2-
sided>>1-sided],
[Book>>1-sided] or
[Book>>2-sided],
select the binding
edge of the originals
in Original.
6 Press [Original Orientation] to select orientation of the originals, either [Top
Edge Top] or [Top Edge Left]. Then press [OK].
7 Press [OK].
8 Place the originals in the document processor or on the platen and press
the Start key.
If the originals are placed on the platen, consecutively replace each
original after pressing the Start key.
After scanning all originals, press [Scan finish] to start copying.
Status 10/10/2007 10:10
Ready to copy. Copies
Cancel OK
Duplex
Press [OK] to display
Add Shortcut
Book
>>2-sided
1-sided
>>2-sided
Top Edge Top
Original
Orientation
1-sided
>>1-sided
2-sided
>>2-sided
Finishing
Binding
Left/Right Binding
Top
2-sided
>>1-sided
Book
>>1-sided
1
the image.
Status 10/10/2007 10:10
Ready to copy. Copies
Cancel OK
Duplex
Press [OK] to display
Add Shortcut
Book
>>2-sided
1-sided
>>2-sided
Top Edge Top
Original
Orientation
1-sided
>>1-sided
2-sided
>>2-sided
Original
Binding
Left/Right Binding
Top
2-sided
>>1-sided
Book
>>1-sided
1
the image.