TA Triumph-Adler DC 2325 - Manual (Page 166)

Status / Job Cancel
5-18 ADVANCED OPERATION GUIDE
Configuring the Devices
Detailed information on controlling devices is given below.
Removable Memory (USB Memory)
• The usage and capacity of the external media connected to this
machine are displayed.
• Press [Format] to format external media.
• Press [Remove] to safely remove the external media. For details, refer
to Removing the USB Memory in the next section.
FAX Port 1
• The information such as sending/receiving and dialing is displayed.
• Press [Line Off] to cancel a fax in sending/receiving. For details, refer
to Canceling FAX Communication on page 5-19 in the section
afterwards.
• Press [Manual RX] to start a fax. Use this function when you want to
talk to the sender before receiving the fax originals. For details, refer to
the Operation Guide of FAX kit.
• Press [Log] to display the fax transmission history. For details, refer to
the Operation Guide of FAX kit.
Format (memory for printer, Compact Flash)
• The information such as cannot recognize or unconnected and the
usage/capacity of memory card are displayed.
• Press [Format] to format the memory card.
• Press [Printing list] to print the partition list. For details, refer to Print of
Partition List.
Removing the USB Memory
There is a way to remove the USB memory safely.
Use the procedure below.
1 Press the Status/Job Cancel key.
Detail
Scanner
Printer
Removable Memory
Hard Disk
FAX Backup Memory
Memory Card
Ready .
Ready .
Safely removable.
Error has occurred.
Not connected.
Format Remove
Display
Error Format Printing list
Printing Jobs Sending Jobs Storing Jobs Device/
Communication
Paper / Supplies
Log Executing TX job **. 10/10/2007 10:10