TA Triumph-Adler DC 2325 - Manual (Page 226)

System Menu
6-58 ADVANCED OPERATION GUIDE
3 Press [On].
4 Press the key for the frame type you want to use.
5 Press [OK].
6 Press the Power key and confirm that the Power key/indicator and the
memory indicator are off. After that, turn the main power switch off and on.
AppleTalk Setup
Select the Apple Talk network connection.
Use the procedure below to select the interface.
1 Press the System Menu key.
2 Press [System], [Next] of Network and then [Change] of AppleTalk.
3 Press [On].
4 Press [OK].
5 Press the Power key and confirm that the Power key/indicator and the
memory indicator are off. After that, turn the main power switch off and on.
System - NetWare
Use NetWare.
On
Off
Cancel OK
Status 10/10/2007 10:10
Frame Type
Ether-II Auto
IP Address 802.3
SNAP
802.2
System - AppleTalk
Cancel OK
Status 10/10/2007 10:10
Use AppleTalk.
*Please set TCP/IP to [On].
On Off