TA Triumph-Adler DC 2325 - Manual (Page 267)

Management
ADVANCED OPERATION GUIDE 7-9
7
1 Press the System Menu key.
2 Press [User Property].
3 Refer to steps 6 to 16 of Adding a User to change user properties.
Press [Detail] of
Login User Name or
Account Name to
check the present
status.
4 Press [Register] to finalize changed user properties.
Unknown login user name Job
This specifies the behavior for handling the jobs sent with unknown login
user names (i.e. unsent IDs). If the User Login is set to invalid and Job
Accounting is set to valid, follow the procedure when the Account ID is
unknown.
The table below shows the available settings.
Use the procedure below to select the interface.
1 Press the System Menu key.
2 Press [User Login/Job Accounting].
3 If user login is disabled, the user authentication screen appears. Enter your
login user name and password and then press [Login]. For this, you need
to log in with administrator privileges. The default login user name and
password are both
“ 3060 ” .
4 Press [Change] of Unknown ID Job.
User:**
User Name:
Account Name: Access Level:
Register
Status 10/10/2007 10:10
E-mail Address:
Login Password Login User Name:
Cancel
User01
Account01 User
[email protected]
******** 0123
Change
Change
Detail
Change
Detail
Item Description
Reject The job is rejected (not printed).
Permit The job is permitted to be printed.