TA Triumph-Adler DC 2325 - Manual (Page 222)

System Menu
6-54 ADVANCED OPERATION GUIDE
LF Action
Set the line feed action when the machine receives the line feed code
(character code 0AH). The table below shows the available settings.
Use the procedure below to select the interface.
1 Press the System Menu key.
2 Press [Printer], [T] and [Change] of LF Action.
3 Press [LF Only], [LF
and CR] or [Ignore
LF].
4 Press [OK].
CR Action
Set the character return action when the machine receives the character
return code (character code 0DH). The table below shows the available
settings.
Use the procedure below to select the interface.
1 Press the System Menu key.
Item Description
LF Only Only line feed performed.
LF and CR Line feed and character return performed.
Ignore LF No line feed performed.
Printer - LF Action
Cancel OK
Status 10/10/2007 10:10
Set the line feed action.
LF and CR LF Only Ignore LF
Item Description
CR Only Only character return performed.
LF and CR Character return and line feed performed.
Ignore CR No character return performed.